Independent guides to home water
Know your water before you buy a treatment system.
Softeners, salt-free conditioners, filters and reverse osmosis are often sold as if they do the same job. They don’t. Start with your utility’s hardness report, then match the device to the problem you actually have. Every figure here is tied to a public source.
- Cited to EPA, USGS, NSF and extension sources
- No pretend lab tests
- Affiliate links always labeled
Where does your water sit?
The USGS hardness scale, with WaterOne’s 2025 average for Leawood and much of Johnson County, Kansas, marked.
- Soft0–60 mg/L
- Moderate61–120 mg/L
- Hard121–180 mg/L
- Very hardOver 180 mg/L
Start here
Three questions to answer before you buy anything
What is my hardness number, which device does which job, and is my number high enough to bother? Each guide answers one of them.
How to read your hardness report
Find total hardness on your utility’s water quality report, convert ppm to grains per gallon, and see it worked through with WaterOne’s numbers for Leawood and Johnson County.
Read the guideSoftener, conditioner, filter or RO?
Only a salt-based softener removes hardness. Conditioners, carbon filters and RO each do a different job.
Read the guide Buying decisions · Guide 3Do you need a softener at about 8 gpg?
About 8 gpg is hard, not very hard. For many city supplies a softener is a comfort choice, not a safety need.
Read the guide Toolppm to grains per gallon
Type the total hardness from your report and get the gpg number your softener asks for. It runs in your browser and sends nothing anywhere.
Open the converter Editorial standardsHow these guides are written
Utility reports, federal agencies, NSF standards and university extension publications, cited at the end of every guide.
Read our standardsHow to use this site
Number first, problem second, device last
Find your number
Pull total hardness from your utility’s latest report and convert it to grains per gallon. On a private well, get a lab test instead.
Name the real problem
Scale, soap and spotting, chlorine taste, or a specific contaminant. Each one points to a different kind of device.
Match the device to the job
Check the certification that fits the claim (NSF/ANSI 44, 42, 53, 401 or 58) before you compare brands or prices.
How we write these guides
Sources you can check. No pretend testing.
SoftenTap is an educational site in progress. We have not tested softeners, filters, or reverse osmosis systems in a lab or in homes, and we do not invent performance numbers.
We are an affiliate partner of Waterdrop. Marked product links may earn a commission. Read the affiliate disclosure and the about page for the full picture.
Public sources, cited. Utility reports, the EPA, USGS, NSF standards and university extension publications, listed at the end of each guide.
Data years called out. When a figure depends on the year, we say which year it is from.
Disclosed where it matters. Paid links are labeled next to the link, not only in the footer.